Bus Clip Replacement

Written By: Dozuki System
  • Comments: 0
  • Favorites: 0

Difficulty

Moderate

Steps

17

Time Required

Suggest a time??

Sections

1

Flags

1

Unnecessary Steps

Unnecessary Steps

This guide contains steps that are not necessary.

  1. Disconnect the 10G network interface cable. Pull the 10G network interface cable pull-tab. Pull the 10G network interface cable pull-tab.

    • Disconnect the 10G network interface cable.

    • Pull the 10G network interface cable pull-tab.

    Edit

  2. Pull the green retention plunger upwards. Pull the server away from the rack, as shown. Pull the server until about (2) inches of the black lid is exposed.

    • Pull the green retention plunger upwards.

    • Pull the server away from the rack, as shown.

    • Pull the server until about (2) inches of the black lid is exposed.

    Edit

  3. Move the server on the crash cart for transportation or out of rack repairs.

    • Move the server on the crash cart for transportation or out of rack repairs.

    Edit

  4. Squeeze (2) lid retention handles towards the center of the node. Slide the lid towards the rear of the server node. Lift and remove the lid.

    • Squeeze (2) lid retention handles towards the center of the node.

    • Slide the lid towards the rear of the server node.

    • Lift and remove the lid.

    Edit

  5. Unscrew (4) Phillips #1 screws. Unscrew (4) Phillips #1 screws.

    • Unscrew (4) Phillips #1 screws.

    Edit

  6. Unscrew (4) Phillips #2 screws.

    • Unscrew (4) Phillips #2 screws.

    Edit

  7. Pull the bus lead retention bracket upwards until resistance is felt. Pull the bus lead retention bracket upwards until resistance is felt.

    • Pull the bus lead retention bracket upwards until resistance is felt.

    Edit

  8. Slide the bus lead retention bracket through the bus lead cables. Place the bus lead retention bracket to the side to reuse.

    • Slide the bus lead retention bracket through the bus lead cables.

    • Place the bus lead retention bracket to the side to reuse.

    • Remove the bus bar clip.

    Edit

  9. Slide the bus lead retention bracket through the bus leads.

    • Slide the bus lead retention bracket through the bus leads.

    Edit

  10. Seat the bus leads into their respective slots near the fans.

    • Seat the bus leads into their respective slots near the fans.

    • Positive (red) lead is nearest system fan 0 (left fan). Negative (black) lead is nearest system fan 1 (right fan).

    Edit

  11. Position the bus lead retention bracket, as shown. Press the bus lead retention bracket down until resistance is felt.

    • Position the bus lead retention bracket, as shown.

    • Press the bus lead retention bracket down until resistance is felt.

    Edit

  12. Screw in (4) Phillips #2 screws to secure both bus leads.

    • Screw in (4) Phillips #2 screws to secure both bus leads.

    • Make sure the red bus lead is most near P12V, and the black bus lead is most near GND, as shown.

    Edit

  13. Screw in (4) Phillips #1 screws to secure the bus lead clip. Screw in (4) Phillips #1 screws to secure the bus lead clip.

    • Screw in (4) Phillips #1 screws to secure the bus lead clip.

    Edit

  14. Install the lid on the server, as shown. Install the lid on the server, as shown. Install the lid on the server, as shown.

    • Install the lid on the server, as shown.

    Edit

  15. Slide the server back into the rack. Continue pushing the server until the server chassis pin secures the server.

    • Slide the server back into the rack.

    • Continue pushing the server until the server chassis pin secures the server.

    • A distinctive 'click' will be felt when the pin secures the server in the rack.

    Edit

  16. Connect the 10G network interface cable. Connect the 10G network interface cable.

    • Connect the 10G network interface cable.

    Edit

  17. Press the power button.

    • Press the power button.

    Edit
Conclusion

This work is licensed under a Creative Commons Attribution 4.0 International License.

Author

Dozuki System

Member since: 09/24/2009

1 Reputation

142 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 122