Introduction
Overview
This guide demonstrates how to replace a power supply unit in an Open Rack chassis. == Acronyms and Terms == * PSU - Power Supply Unit
-
-
Locate the retention tab at the top of the power supply unit you wish to replace.
-
Press down on the retention tab.
-
With the retention tab depressed, grasp the handle and pull the power supply unit away from the chassis.
-
-
-
Insert the new power supply unit into the vacant slot.
-
The unit will make a distinctive 'click' when the power supply unit has connected with the tray's power interface.
-
Almost done!
This work is licensed under a Creative Commons Attribution 4.0 International License.
Conclusion
This work is licensed under a Creative Commons Attribution 4.0 International License.
