Introduction
Overview
- If a Power Suppliy Unit (PSU) or Battery Backup Unit (BBU) slot is empty in a power shelf, then a blanking panel will need to be installed.
- Power One and Delta manufactured power shelves each require a specific set of blanking panels.
-
-
Identify the correct panel for either the BBU or PSU location:
-
Top: BBU
-
Bottom: PSU
-
The blanking panels can also be identified from the inside. Each unit will be labeled either 'BBU' or 'PSU'.
-
-
-
Install the BBU blanking panel by pushing the unit straight into the power shelf opening.
-
A click will indicate proper fitment.
-
-
-
Install the PSU blanking panel by pushing the unit straight into the power shelf openening.
-
A click will indicate proper fitment.
-
Almost done!
This work is licensed under a Creative Commons Attribution 4.0 International License.
Conclusion
This work is licensed under a Creative Commons Attribution 4.0 International License.
